Design,analysis and performance evaluation of a third order distributed protocol for platooning in the presence of time-varying delays and switching topologies

This paper is concerned with the problem of designing a decentralized consensus protocol for platooning of non-identical vehicles in the presence of heterogeneous time-varying communication delays. The proposed control protocol makes use of a state feedback and to this aim drivetrain dynamics are modeled as third-order linear systems. Necessary and sufficient conditions for convergence and exponential stability, derived by using an appropriate Krasovskii functional, demonstrate the ability of the platoon in reaching the required regime with an exponentially bounded behavior. The proposed LMI-based approach allows to estimate both delay margin and decay rate. Moreover, convergence is proven under switching communication network topologies by means of a Lyapunov-Razumikhin function, and the assessment of a string stable behavior has been also theoretically investigated. High-fidelity simulations with Plexe show the effectiveness of the theoretical results in different driving conditions and in the presence of external disturbances and communication impairment. Different communication channel models are used in the validation stage to further prove robustness of the proposed methodology with respect hard delay and packets losses.     

一种商用车铅酸蓄电池状态监控系统的开发

本文介绍一种商用车铅酸蓄电池状态监控系统的开发,系统实现蓄电池传感器实时采集蓄电池状态参数信息,并通过TBOX将数据上传至后台服务器,进行数据存储分析及报警判断,并将亏电报警信息推送给手机客户端,提醒用户注意。同时,系统根据蓄电池SOC值的限值判断,进行电磁开关的切断控制,以保证车辆的正常起动。     

船舶运动姿态测量系统设计与实现

为了获取海上航行船舶及自航模试验中船模的姿态参数,设计一种基于MEMS(微机电系统)技术的波高倾斜一体化传感器的船舶运动姿态测量系统.此系统通过MEMS波高传感器对船舶升沉信息进行采集,利用倾角传感器对船舶的纵摇和横摇姿态信息进行采集,采集到的信息经多路A/D转换后送入单片机进行处理,实时得出船舶运动的升沉、纵摇及横摇变化.经处理后的三组数据由船舶运动姿态测量系统通过RS-485串口送到数据接收处理机存储、分析并实时显示船舶运动的姿态变化曲线,该数据接收处理软件采用VC++编写.经过大量试验及海上测试,该系统性能稳定,测量精度高,具有较大的实用价值.     

客货滚装码头车辆定位系统需求分析和技术实现

针对某客货滚装码头中车辆运输的智能化调度需求,进行车辆位置智能感知的研究,采用物联网感知和计算机视觉技术,得出一种基于视频监控的车辆定位系统方案。该系统能够实时监控码头内进出港车辆,跟踪和记录其路径,支持越界报警,为智能化调度和安全监控提供基础数据。     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

Travel time estimation oriented freeway sensor placement problem considering sensor failure

Optimal sensor placement on freeway corridor is of great interest to transportation authorities. However, current traffic sensors are easily subject to various failures. Therefore, it is necessary to incorporate sensor failure into the optimal sensor placement model. In this article, a two-stage stochastic model is proposed for the purpose of travel time estimation on freeway corridor. To balance the effectiveness and reliability, a stochastic conditional value at risk (CVaR) model is also proposed. Since both models are too complicated, a customized genetic algorithm is developed. Numerical experiments show that considering sensor failure makes a significant performance improvement in the sensor placement pattern. Sensitivity analysis is also applied to investigate the impact of a number of allowable sensors and different traffic sensor failure probability.     

珠三角科技型小微企业协同创新网络的构建

珠三角地区作为我国重要的城市群之一,拥有众多的小微企业,这些企业的发展模式受到大家重视和关注。文中首先分析了珠三角科技型小微企业协同创新存在的问题,提出协同创新网络的构建是解决当前一些问题的有效措施;其次,在协同创新网络的构建中,分析了构建的主体要素、构建的模式、构建的过程和具体的构建框架;最后分析了构建后的协同创新网络的特征。     

基于神经网络和遗传算法的系泊线长度参数优化

摘 要: 针对多成分系泊线三段长度如何取值的问题,采用一种基于神经网络和遗传算法对深海多成分锚泊系统长度进行优化。应用AQWA软件计算多点系泊FPSO,其时域结果直接用于训练BP神经网络。从而利用神经网络的非线性映射功能构建替代锚泊时域计算网络,大大缩短了优化所需的时间。以FPSO最小平面运动值为目标函数,锚链破断强度作为约束条件,采用遗传算法优化系泊长度。计算结果表明,与传统设计的锚泊长度相比,优化后FPSO在各个浪向下纵荡横荡值均能减少20%以上。 关键词:系泊;神经网络;遗传算法;优化     

基于动态聚簇结构的无线传感网络在海上通信中的应用

无线传感网络在海上无线通信系统中的应用越来越广泛,而受到海上环境的影响,网络的能量消耗及生命周期是衡量海上无线传感网络最重要的性能参数。传统无线传感网络的数据传输在单个节点之间进行传递,效率较低,而现有的基于簇结构的无线传感网络,把传感网络中的所有传感器节点按照一定的逻辑结构进行划分,增加了系统的传输效率。本文在研究现有的无线传感网络基础上,提出一种基于动态聚簇结构的无线传感网络,并进行仿真。     

基于无线传感器网络的运动目标检测动态聚类图

有效的目标跟踪需要积极的传感器节点对运动目标群实行跟踪。与单目标跟踪相比,聚类在效能上有显著提高。本文提出准确的相干和非相干运动模式下目标的聚类,采用隐式动态时间框架来评估在创建连接组件加权图的目标关系史。该算法采用目标跟踪中定位算法的关键特征,即估计当前和预测的位置来确定移动目标的方向和距离的关系。模拟结果显示,通过动态调整历史窗口大小和预测目标之间的关系,可以显著提高聚类的准确性并减少运算时间。